30 Series for Oval Track


How to Adjust
Technical Information

Description
Our 30 series shock is a single adjustable mono-tube design that can be used on Asphalt or Dirt Applications. There are four distinct rebound adjustments that allow you to adjust the shock to suit your needs, chassis setup and track conditions. The compression forces are pre-set. It is lightweight, very consistent and affordable.

This design offers a wide rage of valving options to fit a variety of applications at an economical price. The 30 series dampers are available with a variety of valvings to meet your specific damping requirements and can be utilized with a coil-over kit if necessary. Attachments are 1/2" ID bearing on both ends. The 30 Series can be run inverted to reduce unsprung weight.


Downloads
Force Chart for 30-series shocks
Conversion chart for old 30-13xx part numbers

 Parts List
 
Top Eye
(no bearings or snap rings)
  70.52.04.340.0
Standard 1" Bearing   1425.50.00.13
Upgrade 1" Teflon Bearing   COM-8T-31
Bearing Snap Ring   1038.50.02.54
 
5" Steel Shock
Part Number Bump Valving Rebound Valving Min. Length Max. Length
30-5325 3 2-5 10.75 15.75
30-5436 4 3-6 10.75 15.75
     
6" Steel Shock
Part Number Bump Valving Rebound Valving Min. Length Max. Length
30-6325 3 2-5 12.25 18.25
30-6436 4 3-6 12.25 18.25
     
7" Steel Shock
Part Number Bump Valving Rebound Valving Min. Length Max. Length
30-7325 3 2-5 12.75 19.75
30-7436 4 3-6 12.75 19.75
30-7514 5 1-4 12.75 19.75
30-7647 6 4-7 12.75 19.75
     
8" Steel Shock
Part Number Bump Valving Rebound Valving Min. Length Max. Length
3012-8325 3 2-5 14.25 22.25
     
9" Steel Shock
Part Number Bump Valving Rebound Valving Min. Length Max. Length
30-9325 3 2-5 14.75 23.75
30-9436 4 3-6 14.75 23.75
30-9414 4 1-4 14.75 23.75
30-9525 5 2-5 14.75 23.75